Long-term survival and success rate of dental implants placed in reconstructed areas with extraoral autogenous bone grafts: A systematic review and meta-analysis.

OBJECTIVE: To evaluate the long-term survival and success rates of implants placed in reconstructed areas using microvascularized or non-microvascularized extraoral bone grafts. MATERIALS AND METHODS: An electronic search was performed in five databases and in gray literature for articles published until June, 2023. The eligibility criteria comprised observational studies (prospective or retrospective) and clinical trials, reporting survival and success rates of implants placed in extraoral bone grafts. A meta-analysis (implant failure) was categorized into subgroups based on the type of bone graft used. The risk of bias within studies was assessed using the Newcastle-Ottawa Scale. RESULTS: Thirty-one studies met the inclusion criteria. The mean follow-up time was 92 months. The summary estimate of survival rate at the implant level were 94.9% (CI: 90.1%-97.4%) for non-vascularized iliac graft, 96.5% (CI: 91.4%-98.6%) for non-vascularized calvaria graft, and 92.3% (CI: 89.1%-94.6%) for vascularized fibula graft. The mean success rate and marginal bone loss (MBL) were 83.2%; 2.25 mm, 92.2%; 0.93 mm, and 87.6%; 1.49 mm, respectively. CONCLUSIONS: Implants placed in areas reconstructed using extraoral autogenous bone graft have high long-term survival rates and low long-term MBLs. The data did not demonstrate clinically relevant differences in the survival, success, or MBL of grafts from different donor areas or with different vascularization. This systematic review was registered in INPLASY under number INPLASY202390004.

Fracture load comparison of a new Fiber-Reinforced Composite and Zirconia in All-on-Four Prosthesis: An In Vitro Study.

PURPOSE: To compare the fracture load of two framework materials, zirconia and a new fiber-reinforced composite (FRC), for full-arch implant-supported rehabilitations using various cross- sections. MATERIAL AND METHODS: A cobalt-chromium metal model simulating the all-on-four concept and including 2 anterior straight and 2 posterior 45- degree angled multi-unit digital implant analogs was manufactured. 4 straight multi-unit abutments were screwed onto the implant analogs. The metallic model was scanned, and 18 frameworks were fabricated, consisting of 9 made of zirconia and 9 made of fiber-reinforced composite (FRC). The frameworks were then divided into 6 groups, with each group consisting of 3 frameworks (n=3). Group division was based on material type (Zirconia or FRC Trilor) and framework cross-section: 3.5 x 6 mm2, 5.5 x 6 mm2, or 7.5 x 6 mm2. All specimens underwent thermocycling in 2 baths (5 ͦ c- 55 ͦ c for 2350 cycles). Subsequently, the frameworks were cemented to the abutments of the metal model and subjected to a load-to-failure bending test at 3 different points using a universal testing machine (crosshead speed: 1 mm/min) until complete fracture occurred (according to ISO/TS 11405:2015). Descriptive statistics were used to present quantitative variables as means ± standard deviations. To compare two means, Student's t-test or Mann-Whitney test was utilized, and for three means, ANOVA test was used. RESULTS: The FRC group with a 7.5 x 6 mm2 cross-section exhibited the highest load-to-failure values (ranging from 1020 N to 2994N) , while the zirconia group with a 3.5 x 6 mm2 cross-section recorded the lowest values (ranging from 212 N to 1287 N). The material type and framework cross-section significantly affected the mean load-to-fracture values (p< 0.05). Regardless of the framework cross-section, the FRC group exhibited higher fracture loads than the zirconia group. In both materials, fracture load values were increased with larger framework cross-sectional areas, with the highest values observed at the inter-implant midpoint. CONCLUSION: The FRC Trilor demonstrated a fracture load that make it a suitable alternative to zirconia for all-on-four implant prosthetic frameworks.

Clinical and Biochemical Evaluation of the Use of Alb-PRF versus L-PRF in Mandibular Third Molar Extractions: A Split-Mouth Randomized Clinical Trial.

Bone tissue engineering seeks biomaterials that enable cell migration, angiogenesis, matrix deposition, and tissue regeneration. Blood concentrates like platelet-rich fibrin (L-PRF) offer a cost-effective source of cells and growth factors to enhance healing. The present study aimed to evaluate heated serum albumin with liquid PRF (Alb-PRF) and L-PRF clinically and biochemically after placement in dental sockets following mandibular third molar extraction. In a controlled, split-mouth study involving 10 volunteers, 20 extracted molars were treated with either Alb-PRF or L-PRF. Post-extraction, pain, trismus, infection presence, and swelling were measured. The concentrations of different analytes in the surgical sites were also examined. The data were statistically analyzed, with significance defined at p < 0.05 (t-test). No significant difference was noted between the groups for pain and trismus, but Alb-PRF showed a significant reduction in swelling on day seven. The Alb-PRF group showed lower levels of pro-inflammatory cytokines (GM-CSF, IL-1b, IL-6, IFNy, IL-8, IL-15, RANTES, and MIP-1a) after seven days, with only higher expressions of MIP-1b, IL-1b, and MCP-1 found in the L-PRF group. Differences were observed in the release of analytes between L-PRF and Alb-PRF, with Alb-PRF significantly reducing edema after seven days. Alb-PRF reduced edema, while L-PRF increased inflammatory cytokines. When compared to L-PRF, Alb-PRF reduced edema and the release of inflammatory cytokines, suggesting promising effects in socket healing while underscoring the role of growth factors and cytokines in potential applications of blood concentrates.

Histomorphometric evaluation, SEM, and synchrotron analysis of the biological response of biodegradable and ceramic hydroxyapatite-based grafts: from the synthesis to the bed application.

This study aimed to analyze the physicochemical and histological properties of nanostructured hydroxyapatite and alginate composites produced at different temperatures with and without sintering and implanted in rabbit tibiae. Hydroxyapatite-alginate (HA) microspheres (425-600 µm) produced at 90 and 5 °C without (HA90 and HA5) or with sintering at 1000 °C (HA90S and HA5S) were characterized and applied to evaluate thein vitrodegradation; also were implanted in bone defects on rabbit's tibiae (n= 12). The animals were randomly divided into five groups (blood clot, HA90S, HA5S, HA90, and HA5) and euthanized after 7 and 28 d. X-ray diffraction and Fourier-transform infrared analysis of the non-sintered biomaterials showed a lower crystallinity than sintered materials, being more degradablein vitroandin vivo. However, the sinterization of HA5 led to the apatite phase's decomposition into tricalcium phosphate. Histomorphometric analysis showed the highest (p< 0.01) bone density in the blood clot group, similar bone levels among HA90S, HA90, and HA5, and significantly less bone in the HA5S. HA90 and HA5 groups presented higher degradation and homogeneous distribution of the new bone formation onto the surface of biomaterial fragments, compared to HA90S, presenting bone only around intact microspheres (p< 0.01). The elemental distribution (scanning electron microscope and energy dispersive spectroscopy andµXRF-SR analysis) of Ca, P, and Zn in the newly formed bone is similar to the cortical bone, indicating bone maturity at 28 d. The synthesized biomaterials are biocompatible and osteoconductive. The heat treatment directly influenced the material's behavior, where non-sintered HA90 and HA5 showed higher degradation, allowing a better distribution of the new bone onto the surface of the biomaterial fragments compared to HA90S presenting the same level of new bone, but only on the surface of the intact microspheres, potentially reducing the bone-biomaterial interface.

Antimicrobial effect of platelet-rich fibrin: A systematic review of in vitro evidence-based studies.

This systematic review (SR) aimed to evaluate the antimicrobial potential of different types of platelet-rich fibrin (PRF) often used in regenerative treatments. An electronic search was performed in four databases and in Gray literature for articles published until January, 2023. The eligibility criteria comprised in vitro studies that evaluated the antimicrobial effect of different types of PRF. For the analysis of the risk of bias within studies, the modified OHAT (Office of Health Assessment and Translation) tool was used. For the evaluation of the results, a qualitative critical analysis was carried out in the synthesis of the results of the primary studies. Sixteen studies published between 2013 and 2021 were included in this SR. The antimicrobial effects of PRF variations (PRF, injectable PRF [I-PRF], PRF with silver nanoparticles [agNP-PRF], and horizontal PRF [H-PRF]), were analyzed against 16 types of bacteria from the oral, periodontal, and endodontic environments. All types of PRF showed significant antimicrobial action, with the antibacterial efficacy being more expressive than the fungal one. The I-PRF, H-PRF, and agNP-PRF subtypes improve antimicrobial activity. According to the OHAT analysis, no study was classified as having a high risk of bias. Evidence suggests that PRF variations have significant antimicrobial activity, with bacterial action being greater than fungal. Evolutions such as I-PRF, H-PRF, and agNP-PRF improve antimicrobial activity. Future studies analyzing the clinical effect of these platelets are fundamental. This SR was registered in INPLASY under number INPLASY202340016.

The Use of Human Amniotic Membrane (hAM) as a Treatment Strategy of Medication-Related Osteonecrosis of the Jaw (MRONJ): A Systematic Review and Meta-Analysis of the Literature.

Background and objectives: Although it is very uncommon, medication-induced osteonecrosis of the jaw (also known as MRONJ) can have serious consequences. Traditionally, this adverse event has been recognised in patients who were treated with bisphosphonate (BP) drugs. Nevertheless, in recent years, it has been established that individuals having treatment with various types of medications, such as a receptor activator of nuclear factor kappa-Β ligand inhibitor (denosumab) and antiangiogenic agents, have had the same issue. The purpose of this research is to determine if the application of human amniotic membrane (hAM) may be used as a therapy for MRONJ. Material and Methods: A multi-source database (MEDLINE, EMBASE, AMED, and CENTRAL) systematic search was performed. The major objective of this study is to obtain an understanding of the efficacy of hAM when it is employed as a treatment modality for MRONJ. The protocol of this review was registered in the INPLASY register under the number NPLASY202330010. Results: The authors were able to include a total of five studies for the quality analysis, whereas for the quantity evaluation, only four studies were eligible. A total of 91 patients were considered for the investigation. After treatment with human amniotic membrane (hAM), a recurrence of osteonecrosis was observed in n = 6 cases (8.8%). The combined efficacy of surgical therapy and the use of hAM resulted in an overall success rate of 91.2%. Intraoperative complications were only documented in one article, and they were mostly caused by the positioning of the hAM, which led to wound breakdown at the surgical site. Conclusions: Based on the small amount of data and low-quality research included in this study, using human amniotic membranes to treat MRONJ might represent a feasible option. Nevertheless, further studies with a wider patient population are required to understand the long-term impacts.

In vivo osseointegration evaluation of implants coated with nanostructured hydroxyapatite in low density bone.

OBJECTIVE: This in vivo study, aimed to biomechanically, histomorphometrically and histologically evaluate an implant surface coated with nanostructured hydroxyapatite using the wet chemical process (biomimetic deposition of calcium phosphate coating) when compared to a dual acid-etching surface. MATERIAL AND METHODS: Ten sheep (2-4 years old) received 20 implants, 10 with nanostructured hydroxyapatite coating (HAnano), and 10 with dual acid-etching surface (DAA). The surfaces were characterized with scanning electron microscopy and energy dispersive spectroscopy; insertion torque values and resonance frequency analysis were measured to evaluate the primary stability of the implants. Bone-implant contact (BIC) and bone area fraction occupancy (BAFo) were evaluated 14 and 28 days after implant installation. RESULTS: The HAnano and DAA groups showed no significant difference in insertion torque and resonance frequency analysis. The BIC and BAFo values increased significantly (p<0.05) over the experimental periods in both groups. This event was also observed in BIC value of HAnano group. The HAnano surface showed superior results compared to DAA after 28 days (BAFo, p = 0.007; BIC, p = 0.01). CONCLUSION: The results suggest that the HAnano surface favors bone formation when compared to the DAA surface after 28 days in low-density bone in sheep.

Advances in surface treatment of dental implants: a literature review

Amplamente utilizados para substituir dentes perdidos, os implantes dentários nos últimos anos vêm apresentando tecnologias como superfícies com micro e nanotopografia e ajustes nas composições químicas, dentre outros, para melhorar a osseointegração e reduzir o prazo de tratamento, permitindo, assim, carga funcional imediata ou precoce em pacientes com densidade óssea reduzida. Vários métodos são aplicados com intuito de modificar a superfície do implante, como jateamento com areia, corrosão ácida, oxidação anódica, tratamento com flúor, usinagem, pulverização de plasma de titânio e revestimento de fosfato de cálcio; esses métodos podem aumentar notavelmente a área de superfície quando operada a técnica adequadada de modificação, quer por procedimento de adição ou subtração. Tais modificações promovem superfícies rugosas, as quais aumentam a porcentagem de contato osso-implante (BIC) durante o processo de cicatrização óssea inicial. Os principais benefícios da modificação da superfície são melhorar a molhabilidade (hidrofilicidade), adesão e fixação de células a implantes e proliferação celular. Dentre os tratamentos de superfície de implantes dentários destaca-se o jateamento de areia com granulação grossa e ataque-ácido com HCL/H2SO4 (SLA) em altas temperaturas, o revestimento de superfície do implante com hidroxiapatita, oxidação anódica e o duplo ataque ácido. O objetivo deste trabalho é realizar uma revisão de literatura discutindo a importância e eficácia desses métodos para a osseointegração e, por conseguinte, para a redução do período de tratamento.

Widely used to replace lost teeth, dental implants have been presenting technologies such as surfaces with micro and nano topography and adjustments in chemical compositions, among others, to improve osseointegration and reduce treatment time, thus allowing immediate or early functional load in patients with reduced bone density. Several methods are applied to modify the implant surface, such as sandblasting, acid corrosion, anodic oxidation, fluoride treatment, machining, titanium plasma spraying, and calcium phosphate coating; these methods can notably increase the surface area when the appropriate modification technique is operated, either by the addition or subtraction procedure. Such modifications promote rough surfaces, which increase the percentage of bone-implant contact (BIC) during the initial bone healing process. The main benefits of surface modification are to improve wettability (hydrophilicity), adhesion and attachment of cells to implants, and cell proliferation. Among the surface treatments for dental implants, sandblasting with large grit and acid-etching with HCL/H2SO4 (SLA) stands out at high temperatures. The surface coating of the implant with hydroxyapatite, anodic oxidation, and double acid-etching. This work aims to conduct a literature review discussing the importance and effectiveness of these methods for osseointegration and, therefore, for reducing the treatment period.

Survival and complications of zygomatic implants compared to conventional implants reported in longitudinal studies with a follow-up period of at least 5 years: A systematic review and meta-analysis.

BACKGROUND: Zygomatic implants (ZI) have been frequently indicated to rehabilitate patients with extensive atrophies in alternatives to major bone reconstructions. It can be installed inside the maxillary sinus, called instrasinus zygomatic implant (IZI) or outside the maxillary sinus (EZI), depending on the surgery technique. OBJECTIVE: To evaluate the survival and complication rates of ZI in longitudinal studies when compared with conventional implants (CI). METHODS: An electronic search was performed in five databases and in Gray literature for articles published until April, 2022. The eligibility criteria comprised observational cohort studies (prospective or retrospective) and randomized clinical trials (RCTs) with at least 5 years of follow-up, reporting survival rate of ZI versus CI. A meta-analysis was conduct with 18 studies. RESULTS: A total of 5434 implants (2972 ZI and 2462 CI) were analyzed in 1709 patients. The mean survival rate was 96.5% ± 5.02 and 95.8% ± 6.36 for ZI and CI, respectively (mean follow-up time of 78 months). There were observed no statistically significant between ZI and CI in prospective studies (risk ratio [RR] of 1.21; 95% confidence intervals [CIs]: 0.28 to 5.28; chi-squared [Chi2 ] = 11.37; I2  = 56%; degrees of freedom [df] = 5; z-score = 0.25; P = 0.80), retrospective studies IZI (RR of 1.29; 95% CIs: 0.52 to 3.23; Chi2  = 4.07; I2  = 2%; df = 4; z-score = 0.55; P = 0.58) and retrospective studies EZI (RR of 0.72; 95% CIs: 0.31 to 1.66; Chi2  = 1.99; I2  = 0%; df = 3; z-score = 0.78; P = 0.44). The biological complications most related to ZI was sinusitis, followed by infection and oroantral communication. CONCLUSION: ZI have a high long-term survival rate (96.5% with a mean of 91.5 months of follow-up), showing no significant difference when compared with CI. The most prevalent biological complication is sinusitis, being most commonly to the IZI technique. This systematic review (SR) was registered in INPLASY under number INPLASY202280025.

Does Melatonin Associated with Nanostructured Calcium Phosphate Improve Alveolar Bone Repair?

Background and objectives: Calcium phosphates have been widely used as bone substitutes, but their properties are limited to osteoconduction. The association of calcium phosphates with osteoinductive bioactive molecules has been used as a strategy in regenerative medicine. Melatonin has been studied due to its cell protection and antioxidant functions, reducing osteoclastic activity and stimulating newly formed bone. This study aimed to evaluate the effect of topical application of melatonin associated with nanostructured carbonated hydroxyapatite microspheres in the alveolar bone repair of Wistar rats through histological and histomorphometric analysis. Materials and Methods: Thirty female Wistar rats (300 g) were used, divided randomly into three experimental groups (n = 10), G1: nanostructured carbonated hydroxyapatite microspheres associated with melatonin gel (CHA-M); G2: nanostructured carbonated hydroxyapatite (CHA); G3: blood clot (without alveolar filling). The animals were euthanized after 7 and 42 days of the postoperative period and processed for histological and histomorphometric evaluation. Kruskal-Wallis and Dunn's post-test were applied to investigate statistical differences between the groups at the same time point for new bone and connective tissue variables. Mann-Whitney was used to assess statistical differences between different time points and in the biomaterial variable. Results: Results showed a greater volume of residual biomaterial in the CHA-M than the CHA group (p = 0.007), and there were no significant differences in terms of newly formed bone and connective tissue between CHA and CHA-M after 42 days. Conclusions: This study concluded that both biomaterials improved alveolar bone repair from 7 to 42 days after surgery, and the association of CHA with melatonin gel reduced the biomaterial's biodegradation at the implanted site but did not improve the alveolar bone repair.

The Influence of rhBMP-7 Associated with Nanometric Hydroxyapatite Coatings Titanium Implant on the Osseointegration: A Pre-Clinical Study.

Background: Bioceramic nanometer coatings have been regarded as potential substitutes for plasma-sprayed hydroxyapatite coatings, and the association with bone morphogenetic protein (BMP) is an attempt to achieve faster osseointegration to hasten oral rehabilitation. Objective: This study aimed to investigate the effect of recombinant human bone morphogenetic protein-7 (rhBMP-7) on the osseointegration of titanium implants coated with a thin film surface of hydroxyapatite (HA). Methods: Two implants (n = 24) were placed in each white New Zealand rabbits' femur (n = 6). Implants were placed in the right femur after standard instrumentation (A and B) and in the left femur after an over-instrumentation (C and D), preventing bone-implant contact. The distal implants were installed associated with rhBMP-7 (groups B [regular instrumentation] and D [over-instrumentation]) and, also, in the absence of without BMP (control groups A [regular instrumentation] and C [over-instrumentation]). After 4 weeks, the animals were euthanized. The bone blocks containing the implants were embedded in methyl methacrylate and sectioned parallel to the long axis of the implant, which were analyzed by image segmentation. The data were analyzed using a nonparametric statistical method. Results: We observed that Group A had a mean bone formation of 35.6% compared to Group B, which had 48.6% (p > 0.05). Moreover, this group showed 28.3% of connective tissue compared to Group A, with 39.3%. In the over-instrumented groups, rhBMP-7 (Group D) showed an enhanced and significant increase in bone formation when compared with the group without rhBMP-7 (Group C). Conclusion: We concluded that the association of rhBMP-7 to thin nanostructure HA-coated implants promoted greater new bone area than the same implants in the absence of rhBMP-7, mainly in cases of over-instrumented implant sites.

Guia prático de coleta de sangue venoso para obtenção da fibrina rica em plaquetas / Practical guide for collecting venous blood for obtaining platelet rich fibrin

A Fibrina Rica em Plaquetas (PRF) é caracterizada por sua abrangente aplicabilidade na Odontologia. Neste sentido, a venopunção é uma etapa fundamental para sua obtenção. Tal procedimento consiste na identificação das veias superficiais, localizadas na região da fossa antecubital dos membros superiores, para que através da utilização do sistema a vácuo de coleta seja obtido o sangue venoso do paciente. O objetivo deste trabalho é realizar um guia prático abordando cada etapa que compreende a coleta sanguínea para produção do PRF permitindo sua reprodutibilidade de forma segura e eficiente.

Platelet Rich Fibrin (PRF) is characterized by its wide applicability in Dentistry. In this sense, venipuncture is a fundamental step towards obtaining it. Such procedure consists of the identification of superficial veins, located in the region of the antecubital fossa of the upper limbs, so that through the use of the vacuum collection system, the patient's venous blood is obtained. The objective of this work is to carry out a practical guide covering each step that comprises the blood collection for the production of the PRF allowing its reproducibility in a safe and efficient way.

Guia prático de uso da centrífuga IntraSpin® para a obtenção de fibrina rica em plaquetas / Practical guide for using the IntraSpin® centrifuge to obtain platelet-rich fibrin

Obter corretamente a Fibrina Rica em Plaquetas (PRF) depende da execução de cada etapa de maneira protocolada. Nesse sentido, no Laboratório Associado de Pesquisa Clínica (LPCO), da Faculdade de Odontologia da Universidade Federal Fluminense (FO-UFF) é utilizado o sistema IntraSpin® de centrifugação do sangue coletado, que caracteriza o segundo passo para preparo deste material autólogo. O objetivo do presente trabalho é realizar uma descrição prática do correto manuseio da Centrífuga IntraSpin para garantir a obtenção do PRF e sua efetiva aplicabilidade clínica.

Obtaining Platelet Rich Fibrin (PRF) correctly depends on the execution of each step in a protocol manner. In this sense, at the Associated Clinical Research Laboratory (LPCO), of the Faculty of Dentistry in the Federal Fluminense University (FO-UFF) the IntraSpin® centrifugation system is used in the collected blood, that characterizes the second step to prepare this autologous material. The objective of this present work is to make a practical description of the correct handling of the IntraSpin Centrifuge to guarantee the PRF's biocompatibility and its effective clinical applicability.

Does implant location influence the risk of peri-implantitis?

Peri-implantitis is characterized by nonreversible and progressive loss of supporting bone and is associated with bleeding and/or suppuration on probing. Peri-implant disease is considered as the main etiologic factor related to implant failure. Peri-implant disease has a pathogenesis similar to that of periodontal disease, both being triggered by an inflammatory response to the biofilm accumulation. Although the prevalence of peri-implantitis has been evaluated by several clinical studies with different follow-ups, there are currently little data on the impact of implant location and the prevalence of peri-implantitis. The aim of this review, therefore, was to summarize the evidence concerning the prevalence of peri-implantitis in relation to implant location and associated risk predictors. Even though most studies evaluating the prevalence of peri-implantitis in relation to implant location are cross-sectional or retrospective, they suggest that the occurrence of peri-implantitis is most prevalent in the anterior regions of the maxilla and mandible. Moreover, it seems that there is a higher prevalence of peri-implantitis in the maxilla than in the mandible.

In Vivo Evaluation of Permeable and Impermeable Membranes for Guided Bone Regeneration.

BACKGROUND: The degree of biodegradation and the inflammatory response of membranes employed for guided bone regeneration directly impact the outcome of this technique. This study aimed to evaluate four different experimental versions of Poly (L-lactate-co-Trimethylene Carbonate) (PTMC) + Poly (L-lactate-co-glycolate) (PLGA) membranes, implanted in mouse subcutaneous tissue, compared to a commercially available membrane and a Sham group. METHODS: Sixty Balb-C mice were randomly divided into six experimental groups and subdivided into 1, 3, 6 and 12 weeks (n = 5 groups/period). The membranes (1 cm2) were implanted in the subcutaneous back tissue of the animals. The samples were obtained for descriptive and semiquantitative histological evaluation (ISO 10993-6). RESULTS: G1 and G4 allowed tissue adhesion and the permeation of inflammatory cells over time and showed greater phagocytic activity and permeability. G2 and G3 detached from the tissue in one and three weeks; however, in the more extended periods, they presented a rectilinear and homogeneous aspect and were not absorbed. G2 had a major inflammatory reaction. G5 was almost completely absorbed after 12 weeks. CONCLUSIONS: The membranes are considered biocompatible. G5 showed a higher degree of biosorption, followed by G1 and G4. G2 and G3 are considered non-absorbable in the studied periods.

"Sticky Bone" Preparation Device: A Pilot Study on the Release of Cytokines and Growth Factors.

Sticky bone, a growth factor-enriched bone graft matrix, is a promising autologous material for bone tissue regeneration. However, its production is strongly dependent on manual handling steps. In this sense, a new device was developed to simplify the confection of the sticky bone, named Sticky Bone Preparation Device (SBPD®). The purpose of this pilot study was to investigate the suitability of the SBPD® to prepare biomaterials for bone regeneration with autologous platelet concentrates. The SBPD® allows the blending of particulate samples from synthetic, xenograft, or autogenous bone with autologous platelet concentrates, making it easy to use and avoiding the need of further manipulations for the combination of the materials. The protocol for the preparation of sticky bone samples using the SBPD® is described, and the resulting product is compared with hand-mixed SB preparations regarding in vitro parameters such as cell content and the ability to release growth factors and cytokines relevant to tissue regeneration. The entrapped cell content was estimated, and the ability to release biological mediators was assessed after 7 days of incubation in culture medium. Both preparations increased the leukocyte and platelet concentrations compared to whole-blood samples (p < 0.05), without significant differences between SB and SBPD®. SBPD® samples released several growth factors, including VEGF, FGFb, and PDGF, at concentrations physiologically equivalent to those released by SB preparations. Therefore, the use of SBPD® results in a similar product to the standard protocol, but with more straightforward and shorter preparation times and less manipulation. These preliminary results suggest this device as a suitable alternative for combining bone substitute materials with platelet concentrates for bone tissue regeneration.

Passo-a-passo para utilização de fibrina rica em plaquetas como agente hemostático após exodontia: descrição da técnica / Step-by-step for use of platelet-rich fibrin as a hemostatic agent after exodontic: description of the technique

A extração dentária é um dos procedimentos mais frequentes em cirurgia oral e maxilofacial e está relacionada a mudanças fisiológicas no processo alveolar. Neste sentido, entre as principais complicações transoperatórias está a hemorragia, que ocorre geralmente devido a lesões de vasos sanguíneos presentes no alvéolo dentário onde se realizou a exodontia. Uma alternativa para se obter a hemostasia é a utilização da Fibrina Rica em Plaquetas (PRF), um concentrado leucoplaquetário, obtido através do sangue do paciente. A membrana obtida é rica em leucócitos, plaquetas e fatores de crescimento que promovem a modulação de células envolvidas no processo de cicatrização, favorecendo um melhor e mais rápido reparo das lesões cirúrgicas. Esta matriz de fibrina apresenta diversas utilidades para a odontologia, demonstrando bons resultados, além do baixo custo e fácil obtenção. O objetivo deste artigo é descrever a técnica de obtenção da PRF usada como agente hemostático após exodontia, orientando assim, sua reprodutibilidade e utilização.

Tooth extraction is one of the most frequent procedures in oral and maxillofacial surgery and is related to physiological changes in the alveolar process. In this sense, among the main transoperative complications is hemorrhage, which usually occurs through the dental alveolus, due to damage to the blood vessels where the extraction was performed. An alternative to obtain hemostasis is the use of Fibrin Rich in Platelets (PRF), which is a white platelet concentrate obtained from the patient's blood that undergoes a centrifugation step. The membrane obtained after this process is rich in leukocytes, platelets and growth factors that promote modulation of cells involved in the healing process, favoring a better and faster repair of surgical lesions. This fibrin matrix has several uses for dentistry, showing good results, in addition to being low cost and easy to obtain. The aim of this article is to describe the technique for obtaining Platelet-Rich Fibrin (PRF) used as a hemostatic after tooth socket extraction, thus allowing its reproducibility and use.

The Use of Hydroxyapatite Loaded with Doxycycline (HADOX) in Dentoalveolar Surgery as a Risk-Reduction Therapeutic Protocol in Subjects Treated with Different Bisphosphonate Dosages.

Medication-related osteonecrosis of the jaw (MRONJ) is considered as a severe adverse side effect of specific drugs such as anti-resorptive and anti-angiogenic medications. Evidence suggests that MRONJ is linked to invasive dental procedures, mainly dentoalveolar surgery. Several preventive strategies to minimize the risk of developing MRONJ have been investigated. However, no investigation has been attempted to evaluate the therapeutic effect of local drug-delivery technology as a preventive strategy protocol. The aim of this study is to evaluate the efficacy of hydroxyapatite-containing doxycycline (HADOX) in rats with high-risk MRONJ development. All the rats used in this study were divided into seven groups. Six groups of rats out of seven were exposed to two different doses of antiresorptive drug therapy for four weeks before undergoing an upper incisor extraction. After 28 days, all the animals were euthanized, and the bone blocks were processed for histological and histomorphometrical evaluation. The histomorphometric analysis confirmed that newly formed bone (NFB) was present in all groups, with significant differences. NFB in the HADOX group treated with zoledronic acid at 4% showed (28.38; C.I. 22.29-34.48), which represents a significant increase compared to HA (15.69; C.I. 4.89-26.48) (p = 0.02). A similar pattern was observed in the HADOX group treated with zoledronic acid 8% ZA treatment (p = 0.001). Conclusions: HADOX did not inhibit any bone repair and reduced early inflammatory response. Hence, HADOX could promote bone healing in patients undergoing antiresorptive drug therapy.

Does the Coronectomy a Feasible and Safe Procedure to Avoid the Inferior Alveolar Nerve Injury during Third Molars Extractions? A Systematic Review.

This systematic review aimed to review the literature on the coronectomy technique and evaluate the incidence of success and complications as a surgical approach for inferior third molars. Online databases were searched for data on the frequency of inferior alveolar nerve damage, lingual nerve damage, root migration, pain, infection, dry socket, and extraction of the remaining root, and data on the necessity of reintervention were also extracted. Randomized clinical trials, controlled clinical trials, prospective cohort studies, and prospective and retrospective studies with or without the control group were intercepted. This systematic review was registered in PROSPERO (CDR 42020135485). Sixteen papers analyzed 2176 coronectomies in total, and only five of them were judged as appropriate according to methodological quality assessment. The incidence of inferior alveolar nerve injury was documented in 0.59% of the procedures, lingual nerve injury in 0.22%, infection 3.95%, dry socket 1.12%, extraction of the root 5.28%, and reintervention 1.13%. The pain was the most reported, in 22.04% of the population. This study provides an overview of the clinical success and complications of coronectomy, and their prevalence. A coronectomy may be considered a low-risk procedure and an option for treatment to avoid potential damage to nervous structures. However, patients should still undergo a full screening and evaluation of postsurgical procedures.